BAXTER SAW™ – MODEL 700C
SEMI-AUTOMATIC HORIZONTAL BANDSAW
Features included as standard equipment
- Double column machines provides maximum capacity and rigidity
- Design utilizes linear bearings for high stiffness and smooth motion
- Blade is canted at 4 degrees to aid in cutting structural steel
profiles - Hydraulic lift of the saw head
- Saw up travel can be set to minimize distance between the blade and the
top of the material - Semi-automatic cut cycle
- Manual saw control, saw up, rapid saw down, saw cut, vise open and vise
close - Cutting feed rate hydraulically adjusted
- Load sensing valve stops the feed if the blade starts to overload,
typical cutting structural shapes - Magnetic motor starter with automatic sht off at the end of cut, motors
thermal overload protection - Manually adjusted vise
- Powered blade brush to remove cutting chips
- In-feed and out-feed conveyor
- Warnings for broken blade and doors open
- Steel wheels with ductile iron hubs
- Blade guides are carbide faced with rollers to remove blade twist and
dampen vibration - Flood coolant system to both saw guides and an adjusted nozzle mounted on
stationary vise, adjustable flow rates - Direct blade drive using a planetary gear box for a high efficiency
drive - Electric system uses only C.S.A./UL approved components
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
Specifications
CUTTING CAPACITY | |
Round | 26″ (660 mm) |
Rectangular | 25″ x 28″ (635 x 710 mm) |
SPECIFICATIONS | |
Blade size | 1 1/2″ x 23′ (38 x 7010 mm) |
Blade speeds (ft/min) | 60 to 400 (18 to 122 m/min) |
Blade tension (spring compensated) | 25,000 psi |
Table height | 30″ (760 mm) |
Maximum work load | 6,500 lb. (2950 kg) |
Machine weight | 6,700 lb. (3045 kg) |
Overall dimensions | 135″ x 94″ x 98″ (3430 x 2390 x 2490 mm) |
DRIVE | |
Blade drive | 10 Hp (7.5 kW) |
Hydraulic drive | 2 Hp (1.5 kW) |
Voltages available (three phase) | 575, and 460 |
Options
Hydraulic full stroke vise |
Bundle clamping |
Variable vise pressure |
Laser light cut indicator |
Blade on hour meter |
Conveyor 10′ long |
Conveyor 20′ long |
Powered conveyor 10′ long |
Work light |
BAXTER SAW™ – MODEL 700C
SEMI-AUTOMATIC HORIZONTAL BANDSAW