BAXTER SAW™-MODEL 475X1000SA
SEMI-AUTOMATIC HORIZONTAL BANDSAW
Features included as standard equipment
- Double column machine provides maximum capacity and rigidity
- Design utilizes linear bearings for high stiffness and smooth motion
- Hydraulic lift of the saw head
- Saw up travel can be set to minimize distance between the blade and the top of the material
- Saw down travel can be set to allow notching of blocks
- Electronic variable speed drive, panel adjustable
- Manual saw control, saw up, rapid saw down, saw cut, vises open/close, shuttle advance/retract
- Cutting feed rate hydraulically adjusted
- Load sensing valve, which stops the feed if the blade starts to overload, typical when cutting structural shapes.
- Roller on top of blade located at the mid stroke to dampen vibration.
- Full stroke hydraulic vises top and side.
- Top vises on both sides of blade replaceable heavy flexible strip to clamp uneven material
- Vises have variable clamping pressure.
- In feed and discharge conveyor table 37” wide by 24” long
- Steel wheel with ductile iron hubs
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Adjustable flood coolant system to both saw guides and separate nozzle to allow coolant to center of cut
- High efficiency direct drive planetary gear drive system
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade, Instruction and parts manual
Specifications
CUTTING CAPACITY | |
Round | 18″ (460 mm) |
Rectangular | 18″ x 36″ (460 x 915 mm) |
SPECIFICATIONS | |
Blade Size | 1 1/2″ x 18′ 8″ (38 x 5690 mm) |
Blade Speeds (ft/min) | 60 to 400 (18 to 122 m/min) |
Blade Tension (spring compensated) | 25,000 psi |
Table Height | 30″ (760 mm) |
Maximum Work Load | 7,000 lb. (3180 kg) |
Machine Weight | 6,300 lb. (2860 kg) |
Overall Dimensions | 132″ x 74″ x 83″ (3325 x 1880 x 2110 mm) |
DRIVE | |
Blade Drive | 7.5 Hp (6 kW) |
Hydraulic Drive | 2 Hp (2.25 kW) |
Voltages Available (three phases) | 575, and 460 |
Options
Out Feed Horizontal and Vertical Vise |
Rubber Face Horizontal Vise Jaws |
Hydraulic Blade Tension |
Laser Light Cut Indicator |
Conveyor 10′ |
Conveyor Table With Infill Between Rollers |
Powered Conveyor 10′ |
BAXTER SAW™-MODEL 475X1000SA
SEMI-AUTOMATIC HORIZONTAL BANDSAW