BAXTER SAW™ – MODEL 475SA-C
SEMI-AUTOMATIC BANDSAW
Features included as standard equipment
- Double column machine provides maximum capacity and rigidity
- Design utilizes linear bearings for high stiffness and smooth motion
- Blade canted at a 4º angle to aid in cutting structural profiles
- Electronic variable speed
- Blade breakage and open door automatic shut off with alarm indicator
- Hydraulic lift of the saw head
- Rapid saw down as well as cut down
- Saw up and down stops can be set to minimize travel
- Semi-automatic cut cycle
- Manual saw control, saw up, rapid saw down, saw cut
- Cutting feed rate hydraulically adjusted
- Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
- Power disconnect on machine
- Blade guards
- Magnetic motor starter with automatic shut off at the end of cut, motors thermal overload protection
- Powered blade brush to remove cutting chips
- Quick acting material clamp
- Miter cuts up to 45 degrees by swiveling vise
- Adjustable material length stop for repetitive cutting
- Steel wheels
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Flood coolant system to both saw guides with adjustable flow rates
- Direct blade drive using a planetary gear box for a high efficiency design
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
Specifications
CUTTING CAPACITY | |
Round at 0° | 18″ (475 mm) |
Round at 45° | 13 3/8” (340 mm) |
Rectangular | 16” x 24” (405 x 610 mm) |
SPECIFICATIONS | |
Blade Size | 1 1/2” x 16’5” (41 x 5030 mm) |
Blade Speeds (ft/min) | 60 to 400 (18 to 122 m/min) |
Blade Tension (spring compensated) | 30,000 psi (207 MPa) |
Blade Guides | Carbide with rollers |
Table Height | 30” (660 mm) |
Maximum Work Load | 4,500 lb. (2050 kg) |
Machine Weight | 2,100 lb. (950 kg) |
Overall Dimensions | 105” x 49 x 76” (2660 x 1240 x 2660 mm) |
DRIVE | |
Blade Drive | 7 1/2 Hp (5 kW) |
Hydraulic Dive | 2 Hp (1.5 kW) |
Voltages available (three phase) | 575, and 460 |
Options
Laser Light Cut Indicator |
Variable Vise Pressure |
Conveyor 10′ long |
Crating Charges |
BAXTER SAW™ – MODEL 475SA-C
SEMI-AUTOMATIC BANDSAW