BAXTER SAW™ – MODEL 400C-HFA
FULLY AUTOMATIC HORIZONTAL BANDSAW
Features included as standard equipment
- Double column machine provides maximum capacity and rigidity
- Design utilizes linear bearings for high stiffness and smooth motion
- Saw up and down travel can be set to minimize distance the blade travels
- Electronic variable speed drive, panel adjustable
- Parts counter up to 9999
- Fully-automatic cut cycle, consists of material advance, saw cut, at end of cut the saw head will raise to top, repeat until parts counter decrements to 0
- Manual saw control, saw up, rapid saw down, saw cut, vises open/close, shuttle advance/retract
- Cutting feed rate hydraulically adjusted
- Discharge outfeed conveyor 12” long
- Steel wheels with ductile iron hubs
- Load sensing valve which stops the feed if the blade starts to overload, typical when cutting the web of structural shapes
- Saw blade canted at a 10º angle to aid cutting
- Full stroke hydraulic vises, with stationary vise retract of 1/2” to avoid interference with material
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Flood coolant system to both saw guides with adjustable flow rates
- Gear box designed for heavy duty bandsaw machines, high efficiency planetary drive, oil bath lubrication
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
Specifications
CUTTING CAPACITY | |
Round at 90º | 16″ (406mm) |
Rectangular | 16″ x 28″ (406 x 711 mm) |
SPECIFICATIONS | |
Blade Size | 2″ x 22′ (51 x 6706 mm) |
Blade Speeds (ft/min) | 60 to 400 |
Blade Tension (hydraulic compensated) | 25,000 psi |
Table Height | 26 1/4″ (660 mm) |
Maximum Work Load | 10,000 lb. (4536 kg) |
Machine Weight | 10,500 lb. (4763 kg) |
Overall Dimensions | 132” x 98” x 80” (3353 x 2489 x 2032 mm) |
DRIVE | |
Blade Drive | 10 Hp (7.4 kW) |
Hydraulic Drive | 3 Hp (2.2 kW) |
Voltages available (three phase) | 575, 460 / 3 phase / 60 Hz |
Material feed
- Material is feed by a shuttle vise
- Stroke of vise is 16″ with a length limit of 64″(1930 mm)
- Length of cut accuracy to +/-.015″ (.4 mm)
- Length of cut repeatability +/-.015″ (.1 mm)
Options
Bundle Clamping |
Variable Vise Pressure |
Conveyor 10′ long (9 rolls) |
BAXTER SAW™ – MODEL 400C-HFA
FULLY AUTOMATIC HORIZONTAL BANDSAW