BAXTER SAW™ – MODEL 360RFA
AUTOMATIC HORIZONTAL BANDSAW
Fully automatic roller feed type bandsaw machine. The machine is an economical solution to repetitive sawing. Uses a 1¼” (34mm) blade drive by a 5 hp (3.75 kW) motor. Drive system is a high efficiency planetary gearbox and a directly mounted motor (no belts). Blade speed is controlled by a variable frequency drive.
Features included as standard equipment
- Material is feed via 3 drive rollers
- Length of cut is set using an adjustable limit switch
- Length of cut repeatability +/-1/32″
- Automatic cut cycle with decrementing counter
- Double column machine provides maximum capacity and rigidity
- Design utilizes linear bearings for high stiffness and smooth motion
- Large base for stability with large coolant catch area
- Infeed material conveyor 6 rollers 52” long
- Conveniently located control station
- Cutting feed hydraulically regulated
- Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
- Saw up travel can be set to minimize distance
- Manual saw control, saw up, saw down, saw cut
- Magnetic motor starters with thermal overload protection
- Power disconnect on machine
- Blade guards
- Infinitely adjustable blade speed
- Powered blade brush to remove cutting chips
- Quick adjusting material clamp
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Flood coolant system to both saw guides with adjustable flow rates
- Gear box is directly coupled to motor, no belts to wear or adjust
- All bearings are totally enclosed and lubricated for life
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
Specifications
CUTTING CAPACITY | |
Round | 12″ (305 mm) |
Rectangular | 14″ x 17″ (355 x 432 mm) |
SPECIFICATIONS | |
Blade Size | 1″ x 13′ 6″ (27 x 4115 mm) |
Blade Speeds (ft/min) | 60 to 400 (18 to 122 m/min) |
Blade Tension (spring compensated) | 25,000 psi (172 MPa) |
Table Height | 29 7/8″ (780 mm) |
Maximum Work Load | 3,000 lb.(1360 kg) |
Machine Weight | 1,500 lb. (680 kg) |
Overall Dimensions | 93 1/2″ X 32″ X 69 1/2″ (2370 X 810 X 1740 mm) |
DRIVE | |
Blade Drive | 2 Hp (1.5 kW) |
Hydraulic Drive | 1 Hp (200 W) |
Roller Drive | 1/4 Hp (200 W) |
Voltages available (three phase) | 575, 460, 230 and 208 |
Options
Hydraulic Vise |
Variable Vise Pressure |
Conveyor 10′ long |
Conveyor 5′ long |
Crating Charges |
BAXTER SAW™ – MODEL 360RFA
AUTOMATIC HORIZONTAL BANDSAW