BAXTER SAW™ – MODEL 360MV-C
MITERING VERTICAL BANDSAW
Features included as standard equipment
- Machine can miter cut 45 degrees to the right and left, as well as cut vertically
- Feed is driven by ball screw
- Blade speed controlled with a variable frequency drive
- Variable feed rate range .5 to 40 ipm
- Energy efficient design, no hydraulic pump running constantly
- Material is clamped, left & right of blade
- Adjustable head cant of 3º
- Machine movement is on linear bearings to provide maximum rigidity and smooth motion
- Blade Guides are carbide faced with roller to remove blade twist and dampen vibration
- Magnetic motor starter with shut off at the end of cut, motors thermal overload protection
- Blade is preloaded to optimize cutting
- Blade tension is spring compensated
- Blade drive system consists of a direct drive, worm gear drive.
- Convenient located control station mounted on swinging console for operator convenience, controls, saw forward, saw retract, saw cut, coolant on, blade speed, feed rate
- Adjustable stops for saw travel forward allow notching of blocks and saw retract to allow for different sizes of material
- Ductile iron wheels
- Electrical system uses only C.S.A./UL approved components
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
Specifications
| CUTTING CAPACITY | |
| Round at 90º | 14″ (355 mm) |
| Rectangular at 45º | 12 ¾” (323mm) |
| Rectangular | 14″ x 17″ (355 x 432 mm) |
| SPECIFICATIONS | |
| Blade Size | 1¼” x 14’6”(32 x 4420 mm) |
| Blade Speeds (ft/min) | 60 to 400 (18 to 122 m/min) |
| Feed Rate | .5 to 40 inch per minute |
| Blade Tension (spring compensated) | 25,000 psi (172 MPa) |
| Table Height | 34 ½” (876 mm) |
| Maximum Work Load | 2,000 lb.(907 kg) |
| Machine Weight | 1,600 lb. (726 kg) |
| Overall Dimensions | 88” x 46” x 86” (2235 X 1168 X 2184 mm) |
| DRIVE | |
| Blade Drive | 5 Hp (3.7 kW) |
| Feed Drive | 1 Hp (200 W) |
| Voltages available (three phase) | 460/3/60 standard 208,230,575/3/60 and 220/1/60 available |
Options
| Laser Light Cut Indicator |
| Swivel Vise Jaws |
| Voltage 575/3/60 or 208, 230/3/60 |
| Conveyor 10’ long |
| Crating Charges |
| Mist Coolant System |
BAXTER SAW™ – MODEL 360MV-C
MITERING VERTICAL BANDSAW