BAXTER SAW™ – MODEL 280M
HORIZONTAL MITER CUTTING BANDSAW
The model 280M is able to miter cut up to 45 degrees by swinging the saw head. The machine is a general-purpose bandsaw designed for fabricators to cut angles by mitering the saw head.
Features included as standard equipment
- Scissor type saw with heavy duty all welded design for rigidity and strength
- Saw frame swings 45 degrees allowing miter cutting without swinging the material
- Cam lock of saw frame with frame angle indicating scale, hard stops at 0 and 45 degrees
- Large base for stability with large coolant catch area
- Pivot uses taper roller bearings for a highly rigid machine with smooth low friction movement
- Conveniently located control station
- Cutting feed hydraulically regulated with quick shut off to avoid valve adjustments
- Magnetic motor starter with automatic shut off at the end of cut, motor thermal overload protection
- Power disconnect on machine
- Blade guards and fully enclosed drive belt guard
- Powered blade brush to remove cutting chips
- Quick adjusting material clamp
- Material discharge table, built in conveyor with 5 rollers for material feed
- Adjustable material length stop for repetitive cutting
- Ductile iron wheels
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Flood coolant system to both saw guides with adjustable flow rates
- Gear box designed for heavy duty bandsaw machines, precision worm shaft on taper roller bearings and phosphorous bronze worm gear set supported on sealed ball bearings, oil bath lubrication
- All bearings are totally enclosed and lubricated for life
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
Specifications
CUTTING CAPACITY | |
Round at 90 degrees | 11″ (280 mm) |
Round at 45 degrees | 10″ (254 mm) |
Rectangular | 9″ x 16″ (230 x 406 mm) 11” X 14” (280 x 356 mm) |
SPECIFICATIONS | |
Blade Size | 1″ x 12′ (27 x 3660 mm) |
Blade Speeds | 70, 110, 170, 250, 370 ft/min (21, 34, 52, 76, 112 m/min) |
Blade Tension (spring compensated) | 28,000 psi (193 MPa) |
Blade Guides | Carbide with rollers |
Table Height | 30 3/4″ (780 mm) |
Maximum Work Load | 3,000 lb.(1360 kg) |
Machine Weight | 1,350 lb.(614 kg) |
Overall Dimensions | 78”x46”x57” (1980 x 1170 x 1450 mm) |
DRIVE | |
Blade Drive | 2 Hp (1.5 kW) |
Power Requirements | 575/3/60 |
Options
Variable Speed Drive |
Single Phase Power 220/1/60 |
Hydraulic Saw Lift |
Conveyor |
Shipping Crate |
BAXTER SAW™ – MODEL 280M
HORIZONTAL MITER CUTTING BANDSAW