BAXTER SAW™ – MODEL 600SA-C
HEAVY DUTY SEMI-AUTOMATIC HORIZONTAL BANDSAW
Features included as standard equipment
- Double column machine provides maximum capacity and rigidity
- Blade canted at 4 degrees to aid in cutting structural steel and
flats - Design utilizes linear bearings for high stiffness and smooth motion
- Electronic variable speed drive
- Blade breakage and open door shut off with warning indicator
- Hydraulic lift of the saw head
- Saw up travel can be set to minimize distance between the blade and the
top of the material - Saw down travel limit can be set
- Semi-auomatic cut cycle. Manual saw control, saw up, rapid saw down, saw
cut - Cuting feed rate hydraulically adjusted
- Load sensing valve stops the feed if the blade starts to overload,
typical when cutting the web of structural shapes - Magnetic motor starter with shut off at the end of the cut, motors
thermal overload protection - Power disconnect on machine
- Blade guard. Powered blade brush
- Manually adjusted vise
- Adjustable material length stop for repetitive cutting
- Steel wheels with ductile iron hubs
- Blade guides are carbide faced with rollers to remove blade twist and
dampen vibration - Flood coolant system to both saw guides with adjustable flow rates
- Direct blade drive using a planetary gearbox for a high efficiency
drive - Electric system uses only C.S.A./UL approved components and is
electrically approved - Premium quality bimetal bandsaw blade
- Instruction and parts manual
Specifications
CUTTING CAPACITY | |
Round | 24″ (610 mm) |
Rectangular | 22″ x 28″ (560 x 710 mm) |
SPECIFICATIONS | |
Blade size | 1 1/2″ x 20′ (41 x 6096 mm) |
Blade speeds (ft/min) | 60 to 360 ft/min (18 to 110 m/min) |
Blade tension (hydraulic) | 25,000 psi |
Blade guides | Carbide with rollers |
Table height | 26 1/4″ (665 mm) |
Maximum work load | 6,000 lb. (2700 kg) |
Machine weight | 4,100 lb. (1860 kg) |
Overall dimensions | 119″ x 64″ x 84″ (3020 x 1620 x 130 mm) |
DRIVE | |
Blade drive | 7.5 Hp (5 kW) |
Hydraulic drive | 1 Hp (2.2 kW) |
Voltages available (three phase) | 575, and 460 |
Options
Hydraulic vise |
Variable vise pressure |
Laser light cut indicator |
Conveyor 10′ long |
Crating charge |