800SA
The model 800SA is a large capacity machine designed for cutting solids. The machine uses a 2?” (67mm) blade. The blade drive is a heavy-duty high torque, planetary-style gearbox. The motor is mounted directly on the gearbox eliminating the use of belts.
|
700SA
The model 700SA has a large capacity and uses an economical 1½” (41mm) blade. The split vise clamps on both sides of the blade. Machine is ideal for service centers and pipe cutting.
|
480SA
The model 480SA is ideal for bundle cutting. The machine has a split vise which clamps on both sides of the blade. There are front and rear vertical vises to securely clamp bundles of material or to allow the machine to be fed from the front or rear.
|
475SA
The model 475SA has a large capacity for cutting structural profiles and pipes. Uses a 1¼” (34mm) blade drive by a 5 hp (3.75 kW) motor. Drive system is a high efficiency planetary gearbox and a directly mounted motor (no belts). Speed is variable controlled by a variable frequency drive.
|
475M
The model 475M has a large capacity for cutting structural profiles and pipes. Head miters out to 60 degrees by hydraulics with a digital angle display. The blade is canted at 4 degrees to aid in cutting structural profiles and flats.
|
475HFA
The model 475HFA is a fully automatic bandsaw. This machine can cut solids and grating. It has an extra large capacity of 18” (460mm) x 36” (915mm). Machine can cut solids using a large 1½” (41mm) blade driven by a 7½ hp (5 kW) motor.
|
475HDP
The model 475HDP is ideal for cutting solids. The machine has a large 1½” (41mm) blade driven by a 7½ hp (5 kW) motor. Full stroke hydraulic vise is standard.
|
400M
The model 400M is a double miter saw. The machine miter cuts 45 degrees to the front and 60 degrees to the rear. It has hydraulic head lift and full stroke vise. Blade speed is variable.
|
360SAHD
The model 360SAHD is a rugged double column bandsaw machine ideal for cutting solids. Uses a 1¼” (34mm) blade drive by a 5 hp (3.75 kW) motor. Drive system is a high efficiency planetary gearbox and a directly mounted motor (no belts). Blade speed is controlled by a variable frequency drive.
|
360SA
The model 360SA is a rigid double column bandsaw machine with a large 14” (360mm) x 19” (480mm) capacity. Machine has hydraulic head lift and a semi-automatic cut cycle. Machine uses economical 1” blade and has a 2 hp (1.5 kW) drive. Blade speed is set using a five-step pulley.
|
360HFA
The model 360HFA is a fully automatic bandsaw. Material is fed via a hydraulically driven shuttle mounted on linear bearings. The machine is equipped with a 1¼” (34mm) blade and driven by a 5 hp (3.75 kW) motor. Material shuttle stroke is 19” (480mm) with a four times multiplier.
|
360HDP
The model 360HDP is ideal for cutting solids with the large 1¼” (34mm) blade driven by a 5 hp (3.75 kW) motor. Full stroke hydraulic vise is standard.
|
280S
The model 280S is a general-purpose utility bandsaw. The heavy-duty designed machine is used in industrial, maintenance, government and military applications.
|
280RFA
Fully automatic roller feed type bandsaw machine. The machine is an economical solution to repetitive sawing. Machine comes standard with a conveyor, parts counter and out of material sensor.
|
280M
The model 280M is able to miter cut up to 45 degrees by swinging the saw head. The machine is a general-purpose bandsaw designed for fabricators to cut angles by mitering the saw head.
|
220M
The model 220M is a horizontal / vertical bandsaw with a miter cutting saw head. The machine uses single-phase 120-volt power.
|
