The model 800SA is a large capacity machine designed for cutting solids. The machine uses a 2⅝” (67mm) blade. The blade drive is a heavy-duty high torque, planetary-style gearbox. The motor is mounted directly on the gearbox eliminating the use of belts.

Round 32″ (810 mm)
Square 32″ (810 mm)
Blade Size 2 5/8″ x 26′ 6” (67 x 8077 mm)
Blade Speeds 60 to 340 ft/min (18 to 104 m/min)
Blade Tension (hydraulic) 30,000 psi (207 MPa)
Blade Guides Carbide with rollers
Table Height 27″ (686 mm)
Maximum Work Load 7,500 lb. (3400 kg)
Machine Weight 6,500 lb. (2950 kg)
Overall Dimensions 155”x82”x98”(3937x2080x2490mm)
Blade Drive 10 Hp (15 kW)
Hydraulic Drive 3 Hp (2.25 kW)
Voltage (three phase) 460, 575


  • Double column machine provides maximum capacity and rigidity
  • Design utilizes linear bearings for high stiffness and smooth motion
  • Hydraulic tensioning of 2-5/8” bandsaw blade
  • Hydraulic lift of the saw head
  • Saw up travel can be set to minimize distance between the blade and the top of the material
  • Saw down travel can be set to allow notching of blocks
  • Semi-automatic cut cycle and manual saw control, saw up, rapid saw down, saw cut
  • Cutting feed rate hydraulically adjusted
  • Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
  • Magnetic motor starter with automatic shut off at the end of cut, motors thermal overload protection
  • Blade speed controlled by a variable frequency drive
  • Lockable power disconnect on machine
  • Blade guards
  • Powered blade brush to remove cutting chips
  • Split vise design clamps material on both side of blade
  • Infeed conveyor and material discharge conveyor
  • Alarms for broken blade / under tension and doors open
  • Steel wheels with ductile iron hubs
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
  • Flood coolant system to both saw guides and a adjustable nozzle mounted on stationary vise, all with adjustable flow rates
  • Gear box designed for heavy duty bandsaw machines, high efficiency planetary gear system
  • All ball bearings are totally enclosed and lubricated for life
  • Electric system uses only C.S.A./UL approved components and is electrically approved
  • Premium quality bimetal bandsaw blade
  • Instruction and parts manual
Conveyor 10’

 Download Brochure

Leave a Reply

Your email address will not be published. Required fields are marked *