475M
BAXTER SAW™ - MODEL 475M
SEMI-AUTOMATIC DOUBLE COLUMN HORIZONTAL MITER BANDSAW
The model 475M has a large capacity for cutting structural profiles and pipes. Head miters out to 60 degrees by hydraulics with a digital angle display. The blade is canted at 4 degrees to aid in cutting structural profiles and flats.
| CUTTING CAPACITY at 0° | |
| Round at 0° | 18″ (460 mm) |
| Rectangular at 0° | 17¼”H x 25½”W (438 x 648 mm) |
| Rectangular (maximum height) at 45° | 17¼”H x 15¾”W (438 x 400 mm) |
| Rectangular (maximum width) at 45° | 13”H x 18½”W (330 x 470 mm) |
| Rectangular (maximum height) at 60° | 17¼”H x 9½”W (438 x 241 mm) |
| Rectangular (maximum width) at 60° | 14½”H x 11¼”W (368 x 285 mm) |
| SPECIFICATIONS | |
| Blade Size | 1 1/4″ x 16′ 6″ (34 x 5030 mm) |
| Blade Speeds (continuously variable) | 60 to 400 ft/min (18 to 122 m/min) |
| Blade Tension (spring compensated) | 30,000 psi (207 MPa) |
| Blade Guides | Carbide with rollers |
| Table Height | 26 1/4″ (670 mm) |
| Maximum Work Load | 5,000 lb. (2050 kg) |
| Machine Weight | 2,800 lb. (1090 kg) |
| Overall Dimensions | 9′ x 5′ x 8′(2750 x 1500 x 2400 mm) |
| DRIVE | |
| Blade Drive | 5 Hp (3.75 kW) |
| Hydraulic Drive | 2 Hp (.75 kW) |
| Voltages available (three phase) | 575, 460, 230 and 208 |
FEATURES INCLUDED AS STANDARD EQUIPMENT
- Double column machine provides maximum capacity and rigidity
- Blade angle is at 4° from the horizontal which assists in the cutting of large sections and structural profiles
- Hydraulic lift of the saw head
- Hydraulic full stroke vise
- Hydraulic tilt of saw head with digital display of angle
- Design utilizes linear bearings for high stiffness and smooth motion
- Electronic variable speed
- Blade breakage and open door automatic shut off with alarm indicator
- Saw up travel can be set to minimize distance between the blade and the top of the material
- Saw down travel can be set to allow notching of blocks
- Semi-automatic cut cycle
- Manual saw control, saw up, rapid saw down, saw cut
- Cutting feed rate hydraulically adjusted
- Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
- Magnetic motor starter with automatic shut off at the end of cut, motors thermal overload protection
- Power disconnect on machine
- Blade guards
- Powered blade brush to remove cutting chips
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Flood coolant system to both saw guides with adjustable flow rates
- Direct blade drive using a planetary gear box for a high efficiency design
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
| OPTIONS |
| Work Light |
| Conveyor |
| Crating Charges |
