BAXTER SAW™ – MODEL 400M2

DOUBLE MITER HORIZONTAL BANDSAW

Features included as standard equipment

  • Double column machine provides maximum capacity and rigidity
  • Design utilizes linear bearings for high stiffness and smooth motion
  • Saw frame swings 45° forward, 60° to the rear allowing miter cutting with out swinging the material, indicating scale showing cut angle, hard stops at +45°, 0° and -60°
  • Hydraulic saw head lift and full stroke material clamp vise
  • Large base for stability with large coolant catch area
  • Conveniently located control station mounted on a swinging console for operator convenience
  • Cutting feed hydraulically regulated with feed rate scale
  • Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
  • Blade guards
  • Magnetic motor starter with automatic shut off at the end of cut, motor thermal overload protection. Power disconnect on machine
  • Powered blade brush to remove cutting chips
  • Adjustable material length stop for repetitive cutting
  • Ductile iron wheels
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration, internal coolant channel to lubricate guides and direct coolant onto blade
  • Flood coolant system to both saw guides with adjustable flow rates
  • Heavy duty gear box. Motor is directly coupled. No belts to adjust or wear
  • Electric system uses only C.S.A./UL approved components and is electrically approved
  • Premium quality bimetal bandsaw blade
  • Instruction and parts manual

Specifications

CUTTING CAPACITY
Round at 90 degrees 16″ (400 mm)
Rectangular at 45 degrees 15″ (380 mm)
Rectangular at 60 degrees 10 1/2″ (265 mm)
Rectangular at 90 degrees 21″w x 12 3/4″h (530 x 400 mm)
Rectangular at 45 degrees 15″w x 10 1/2″h (380 x 320 mm)
Rectangular at 60 degrees (maximum height) 10 1/2″w x 10 1/2″h (365 x 365 mm)
Rectangular at 60 degrees (maximum height) 7 3/4″w x 16″h (195 x 400 mm)
SPECIFICATIONS
Blade Size 1 1/4″ x 14’6″ (34 x 4450 mm)
Blade Speeds (ft/min) 60 to 400 (18 to 122 m/min)
Blade Tension (spring compensated) 25,000 psi
Table Height 30 5/8″ (775 mm)
Maximum Work Load 3,000 lb. (1350 kg)
Machine Weight 2,150 lb. (980 kg)
Overall Dimensions 96″ x 43″ x 72″ (2440 x 1100 x 1830 mm)
DRIVE
Blade Drive 5 Hp (3.75 kW)
Hydraulic Drive 2 Hp (2.25 kW)
Voltages Available (three phase) 575, 460, 130/60 Hz

Options

Laser Light Cut Indicator
Work Lights
Conveyor 10′ long

BAXTER SAW™ – MODEL 400M2

DOUBLE MITER HORIZONTAL BANDSAW