400M
BAXTER SAW™ - MODEL 400M
HORIZONTAL MITERING BANDSAW
The model 400M is a double miter saw. The machine miter cuts 45 degrees to the front and 60 degrees to the rear. It has hydraulic head lift and full stroke vise. Blade speed is variable.
| CUTTING CAPACITY | |
| Round AT 90 degrees | 16″ (400 mm) |
| Round at 45 degrees | 14″ (355 mm) |
| Round at 60 degrees | 10″ (254 mm) |
| Rectangular (maximum width) | 8 1/2″ x 21” (215 x 530 mm) |
| Rectangular (maximum height) | 15” X 17” (380 x 430 mm) |
| SPECIFICATIONS | |
| Blade Size | 1″ x 13’6” (27 x 4115 mm) |
| Blade Speeds (continuously adjustable) | 70 to 450 ft/min (21 to 137 m/min) |
| Blade Tension (spring compensated) | 28,000 psi (193 MPa) |
| Blade Guides | Carbide with rollers |
| Table Height | 31″ (787 mm) |
| Maximum Work Load | 3,000 lb. (1360 kg) |
| Machine Weight | 1,750 lb. (800 kg) |
| Overall Dimensions | 81”Wx46”Dx55”H(2060×1170x1400 mm) |
| DRIVE | |
| Blade Drive | 3 Hp (2.2 kW) |
| Power Requirements | 208, 230, 460 or 575/3/60 |
FEATURES INCLUDED AS STANDARD EQUIPMENT
- Scissor-type saw with heavy duty all welded design for rigidity and strength
- Saw frame swings 45° forward, 60° to the rear allowing miter cutting without swinging the material, indicating scale showing cut angle, hard stops at +45°, 0° and -60°
- Hydraulic saw head lift and full stroke material clamp
- Large base for stability with large coolant catch area
- Pivot uses taper roller bearings for a highly rigid machine with smooth low friction movement
- Conveniently located control station mounted on a swinging console for operator convenience
- Cutting feed hydraulically regulated with feed rate scale
- Magnetic motor starter with automatic shut off at the end of cut, motor thermal overload protection
- Power disconnect on machine
- Blade guards and fully enclosed drive belt guard
- Powered blade brush to remove cutting chips
- Adjustable material length stop for repetitive cutting
- Ductile iron wheels
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration, internal coolant channel to lubricate guides and direct coolant onto blade
- Flood coolant system to both saw guides with adjustable flow rates
- Gear box designed for heavy duty bandsaw machines, precision worm shaft on taper roller bearings and phosphorous bronze worm gear set supported on sealed ball bearings, oil bath lubrication
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
| OPTIONS |
| Single Phase Power 220/1/60 (2 hp) |
| Work Light |
| Heavy Duty Drive 5 hp, 1 1/4” x 14’ 6” blade |
| Conveyor |
| Shipping Crate |
