360-SAHD

BAXTER SAW™ – MODEL 360-SAHD
HEAVY DUTY SEMI-AUTOMATIC HORIZONTAL BANDSAW

The model 360SAHD is a rugged double column bandsaw machine ideal for cutting solids. Uses a 1¼” (34mm) blade drive by a 5 hp (3.75 kW) motor. Drive system is a high efficiency planetary gearbox and a directly mounted motor (no belts). Blade speed is controlled by a variable frequency drive.

CUTTING CAPACITY
Round 14″ (360 mm)
Round at 45 degrees 10 3/4″ (273 mm)
Rectangular 14″ x 19″ (360 x 480 mm)
SPECIFICATIONS
Blade Size 1 1/4″ x 14′ 6″ (34 x 4420 mm)
Blade Speeds (continuously variable) 60 to 400 ft/min (18 to 122 m/min)
Blade Tension (spring compensated) 30,000 psi (207 MPa)
Blade Guides Carbide with rollers
Table Height 26 1/4″ (660 mm)
Maximum Work Load 3,000 lb.(1350 kg)
Machine Weight 1,600 lb. (720 kg)
Overall Dimensions 7’6” x 4′ x 6′ (2290x1220x1830 mm)
DRIVE
Blade Drive 5 Hp (3.75 kW)
Hydraulic Drive 1 Hp (.75 kW)
Voltages available (three phase) 575, 460, 230 and 208

FEATURES INCLUDED AS STANDARD EQUIPMENT

  • Double column machine provides maximum capacity and rigidity
  • Design utilizes linear bearings for high stiffness and smooth motion
  • Hydraulic lift of the saw head
  • Saw up travel can be set to minimize distance between the blade and the top of the material
  • Saw down travel can be set to allow notching of blocks
  • Semi-automatic cut cycle
  • Manual saw control, saw up, rapid saw down, saw cut
  • Direct blade drive system with electronic variable speed control
  • Cutting feed rate hydraulically adjusted
  • Load sensing valve stops the feed if the blade starts to overload, typical cutting structural shapes
  • Magnetic motor starter with automatic shut off at the end of cut, motors thermal overload protection
  • Power disconnect on machine
  • Blade guards
  • Powered blade brush to remove cutting chips
  • Quick acting material clamping
  • Miter cuts up to 45 degrees by swiveling vise
  • Adjustable material length stop for repetitive cutting
  • Ductile iron wheel
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
  • Flood coolant system to both saw guides with adjustable flow rates
  • High efficiency direct drive planetary gear drive system
  • All bearings are totally enclosed and lubricated for life
  • Electric system uses only C.S.A./UL approved components and is electrically approved
  • Premium quality bimetal bandsaw blade
  • Instruction and parts manual
OPTIONS
Hydraulic Vise
Variable Vise Pressure
Work Lights
Conveyor
Crating Charges

 Download Brochure