360HFA
BAXTER SAW™ – MODEL 360HFA
FULLY AUTOMATIC HORIZONTAL BANDSAW
The model 360HFA is a fully automatic bandsaw. Material is fed via a hydraulically driven shuttle mounted on linear bearings. The machine is equipped with a 1¼” (34mm) blade and driven by a 5 hp (3.75 kW) motor. Material shuttle stroke is 19” (480mm) with a four times multiplier.
| CUTTING CAPACITY | |
| Round | 13″ (360 mm) |
| Rectangular | 13″ x 18″ (360 x 460 mm) |
| SPECIFICATIONS | |
| Blade Size | 1 1/4″ x 14′ 6″ (34 x 4420 mm) |
| Blade Speeds (continuously variable) | 60 to 400 ft/min (18 to 122 m/min) |
| Blade Tension (spring compensated) | 30,000 psi (207 MPa) |
| Blade Guides | Carbide with rollers |
| Table Height | 26 1/4″ (660 mm) |
| Maximum Work Load | 5,600 lb. (2545 kg) |
| Machine Weight | 2,600 lb. (1180 kg) |
| Overall Dimensions | 88”x80”x70”(2235x2030x1780 mm) |
| DRIVE | |
| Blade Drive | 5 Hp (3.75 kW) |
| Hydraulic Drive | 2 Hp (1.5 kW) |
| Voltages available (three phase) | 575, 460, 230 and 208 |
MATERIAL FEED
- Material is feed by a shuttle vise
- Stroke of vise is 19″ (480 mm) with a length limit of 76″ (1930 mm)
- Length of cut accuracy to +/-.015″ (.4 mm)
- Length of cut repeatability +/-.005″ (.1 mm)
FEATURES INCLUDED AS STANDARD EQUIPMENT
- Double column machine provides maximum capacity and rigidity
- Design utilizes linear bearings for high stiffness and smooth motion
- Hydraulic lift of the saw head
- Saw up travel can be set to minimize distance between the blade and the top of the material
- Saw down travel can be set to allow notching of blocks
- Electronic variable speed drive, panel adjustable
- Parts counter up to 9999
- Fully-automatic cut cycle, consists of material advance, saw cut at end of cut the saw head will raise to top, repeat until parts counter decrements to 0
- Manual saw control, saw up, rapid saw down, saw cut
- Cutting feed rate hydraulically adjusted
- Load sensing valve which stops the feed if the blade starts to overload, typical when cutting the web of structural shapes
- Full stroke hydraulic vises, split vise design clamps on both sides of the blade
- Cast ductile iron wheel
- Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
- Flood coolant system to both saw guides with adjustable flow rates
- High efficiency direct drive planetary gear drive system
- Electric system uses only C.S.A./UL approved components and is electrically approved
- Premium quality bimetal bandsaw blade
- Instruction and parts manual
| OPTIONS |
| Variable Vise Pressure |
| Bundle Clamping |
| Conveyor |
| Crating Charges |
