280RFA

BAXTER SAW™ – MODEL 280RFA
HORIZONTAL BANDSAW

Fully automatic roller feed type bandsaw machine. The machine is an economical solution to repetitive sawing. Machine comes standard with a conveyor, parts counter and out of material sensor.

CUTTING CAPACITY
Round 11″ (280mm)
Rectangular 9” x 16” (230 x 406 mm) 11” x 14″ (280 x 355 mm)
SPECIFICATIONS
Blade Size 1” x 12’ (27 x 3660 mm)
Blade Speeds 70,110,170,250,370 ft/min (21,34,52,76,112 m/min)
Blade Tension (spring compensated) 28,000 psi (193 MPa)
Blade Guides Carbide with rollers
Table Height 30 3/4” (780 mm)
Maximum Work Load 3,000 lb. (1360 kg)
Machine Weight 1,400 lb. (636 kg)
Overall Dimensions 78”x30”x57” (1980x760x1450 mm)
DRIVE
Blade Drive 2 Hp
Hydraulic Drive 1 Hp
Roller Drive 1/4 Hp
Voltages available (three phase) 575, 460, 230 and 208

MATERIAL FEED

  • Material is feed via 3 drive rollers
  • Length of cut is set using an adjustable limit switch
  • Length of cut repeatability +/-1/32″

FEATURES INCLUDED AS STANDARD EQUIPMENT

  • Scissor-type saw with heavy duty all welded design for rigidity and strength
  • Large base for stability with large coolant catch area
  • Infeed material conveyor 6 rollers 52 1/2” long
  • Pivot uses tapered roller bearings for a highly rigid machine with smooth low friction movement
  • Conveniently located control station
  • Cutting feed hydraulically regulated
  • Saw up travel automatically set to minimize distance between the blade and the material
  • Manual saw control, saw up, saw down, saw cut
  • Automatic cut cycle with decrementing counter
  • Magnetic motor starters with thermal overload protection
  • Power disconnect on machine
  • Blade guards and fully enclosed drive belt guard
  • Powered blade brush to remove cutting chips
  • Quick adjusting material clamp
  • Material discharge table
  • Adjustable material length stop for repetitive cutting
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration
  • Flood coolant system to both saw guides with adjustable flow rates
  • Gear box designed for heavy duty bandsaw machines, precision worm shaft on taper roller bearings and phosphorous bronze worm gear set supported on sealed ball bearings,
    oil bath lubrication
  • All bearings are totally enclosed and lubricated for life
  • Electric system uses only C.S.A./UL approved components and is electrically approved
  • Premium quality bimetal bandsaw blade
  • Instruction and parts manual
OPTIONS
Variable Speed Drive
Single Phase Electrics 220/1/60
Conveyor
Shipping Crate

Download Brochure