PRODUCT LINE:
» Verticut Model 115B
» Baxter MiterCut Model 220M
» Baxter MiterCut Model 280M
» Baxter Saw Model 280S
» Baxter Saw Model 360SA
» Baxter Saw Model 360HDP
» Baxter Saw Model 360HFA
» Baxter Saw Model 400M
» Baxter Saw Model 475SA
» Baxter Saw Model 700SA
|
Baxter Saw Model 700SA
|
|
Click arrow for larger image. |
SPECIFICATIONS:
| Cutting Capacity Round | 27 1/2" |
|
Cutting Capacity Square | 27 1/2" |
|
Blade Size | 1 1/2" x 23' |
|
Blade Speeds (ft/min) | 100, 140, 200, 260 |
|
Blade Tension (spring compensated) | 30,000 psi |
|
Blade Guides | Carbide with rollers |
|
Table Height | 27" |
|
Maximum Work Load | 6,500 lb. |
|
Machine Weight | 4,500 lb. |
|
Overall Dimensions | 12' x 5' x 7' |
|
Blade Drive | 10 Hp |
|
Hydraulic Drive | 2 Hp |
|
Voltages available (three phase) | 575, 460, 230 and 208 |
FEATURES INCLUDED:
| double column machine utilizing linear bearings for maximum saw head stability |
|
cutting feed rate hydraulically controlled |
|
load sensing valve which stops the feed if the blade starts to overload, typical when cutting the web of structural shapes |
|
saw up travel can be set so to minimize distance between the blade and the top of the material |
|
saw down travel can be set to allow notching of blocks |
|
manual saw control, saw up, saw down, saw cut |
|
semi-automatic cut cycle |
|
split vise design clamps material on both side of blade |
|
material discharge table with material stop |
|
heavy duty gear box |
|
all ball bearings are totally enclosed and lubricated for life |
|
blade guides are carbide faced with rollers to remove blade twist and dampen vibration |
|
flood coolant system to both saw guides |
|
electric system uses only C.S.A. approved components |
|
bimetal bandsaw blade |
|
instruction and parts manual |
OPTIONS:
| electronic variable speed drive100 to 400 sfpm |
|
hydraulic vises full stroke |
|
conveyor 10’ |
|
crating charges |
COMMENTS:
| The machines are warranted for a period of one year from date of purchase, some exceptions apply, contact the manufacturer for full details. |
| Terms are C.O.D. unless prior arrangements have been made. |
| Machines are F.O.B. our plant in Toronto, Ontario. |
Due to Baxter Verticut policy of continuous improvement we
reserve the right to change machine without incurring any obligations.
Machine shown may have optional equipment installed.
|
|
