PRODUCT LINE:
» Verticut Model 115B
» Baxter MiterCut Model 220M
» Baxter MiterCut Model 280M
» Baxter Saw Model 280S
» Baxter Saw Model 360SA
» Baxter Saw Model 360HDP
» Baxter Saw Model 360HFA
» Baxter Saw Model 400M
» Baxter Saw Model 475SA
» Baxter Saw Model 700SA
|
Baxter MiterCut Model 280M
|
|
Click arrow for larger image. |
SPECIFICATIONS:
| Capacity Round at 90 degrees | 11" |
|
Capacity Round at 45 degrees | 10" |
|
Capacity Rectangular (max. width) | 9" x 16" |
|
Capacity Rectangular (max. height) | 11" X 14" |
|
Blade Size | 1" x 12' |
|
Blade Speeds (ft/min) | 65, 95, 140, 295, 280 |
|
Blade Tension | 25,000 psi (spring compensated) |
|
Blade Guides | Carbide with rollers |
|
Table Height | 31" |
|
Maximum Work Load | 3,000 lb. |
|
Machine Weight | 1,350 lb. |
|
Overall Dimensions | 78"W x 46"D x 50"H |
|
Blade Drive | 2 Hp |
|
Power Requirements | 575/3/60 |
FEATURES INCLUDED:
| saw frame swings 45 degrees allowing |
| mitre cutting with out swinging the material |
|
cam lock of saw frame with frame angle indicating scale |
|
hard stops at 0 and 45 degrees |
|
scissor type saw with heavy duty all welded design for rigidity and strength |
|
large base for stability with large coolant catch area |
|
quick adjusting material clamp |
|
blade guides are carbide faced with rollers to remove blade twist and dampen vibration |
|
flood coolant system to both saw guides |
|
material discharge table |
|
built in conveyor with 5 rollers for material feed |
|
steel wheels |
|
heavy duty cast iron gear box designed for band sawing machines, with precision machined worm, phosphorous bronze worm gear, taper roller bearings and oil bath lubrication |
|
magnetic motor starter with automatic shut off at the end of cut |
|
conveniently located control station |
|
cutting feed hydraulically regulated with quick shut off to avoid valve adjustments |
|
electric system uses only C.S.A. approved components and is inspected |
|
bimetal bandsaw blade |
|
instruction and parts manual |
OPTIONS:
| Variable Speed Drive |
|
Single Phase Power 220/1/60 |
|
Three Phase Disconnect |
|
Conveyor |
|
Shipping Crate |
COMMENTS:
| The machines are warranted for a period of one year from date of purchase, some exceptions apply, contact the manufacturer for full details. |
| Machines are F.O.B. our plant in Toronto, Ontario. |
Due to Baxter Verticut policy of continuous improvement we
reserve the right to change machine without incurring any obligations.
Machine shown may have optional equipment installed.
|
|
